.pdf asset-performance field_planning_color fit_for_purpose_color production_optimization_recovery_color kpi-box kpi-money kpi-time ::before

Type 1541/1543 Safety Valve

  • Benefits:

    Two-adjusting-ring design of the Consolidated Type 1541 and 1543 safety valves allows for sharp opening action and full lift at three percent overpressure. The self-aligning spring washers help increase repeatability and the valve's life span.

    Features:

    Suitable for steam and other compressible fluid applications. the Consolidated Type 1541 and 1543 safety valves are ASME Section I and VIII approved. They are most commonly used in pharmaceutical, dying and process plants.

    Applications:

    The Consolidated Type 1541 and 1543 safety valves are configured for steam and other compressible fluids. Compression media is limited to non-toxic, non-flammable, non-corrosive service. They are most commonly used in pharmaceutical and process plants.

    Inlet Sizes:

    1/2" through 2 1/2"

    Inlet Ratings:

    Threaded

    Outlet Sizes:

    3/4" through 2 1/2"

    Outlet Ratings:

    Threaded

    Orifice Sizes:

    D, E, F, G, H and J

    Set Pressure Range:

    15 to 350 psig

    Temperature Range:

    Up to 431°F

    Materials:

    Cast iron bonnet with brass base and trim

    Standards and Regulations:

    ASME B & PVC, Section 1 & VIII

Type 1541/1543 Safety Valve

Type 1541/1543 Safety Valve

Type 1541/1543 Safety Valve

Applicable Industries

Power Generation, Paper.

Key Applications : Reactor Building, Turbine Building, Reactor Facility Grounds & BOP.