Masoneilan 535V Series Pressure Reducing & Differential Pressure Regulator for Micro-Flow Pressure Reduction

• Description

  The Masoneilan Model 535V pressure regulators are designed to provide accurate reduced pressures of air, liquid, saturated and superheated steam. Model 535V is available in sizes ½” , ¾” and 1”, with full area and reduced trim to handle the small-to-moderate microflow flow applications. For temperatures over the rating of the diaphragm material, the regulator must be mounted with the actuator below the centerline of the regulator body.  The diaphragm will be protected from the high temperature by a condensate barrier in the sensing line and actuator diaphragm case. If installed otherwise, an adequate condensate barrier must be incorporated. Consult factory for more information. Refer to Actuator 10900 Series Tech Spec for actuator selection.

  Function

  •  Pressure Reducing  535V
    • 535V -50 Differential Pressure

  Service

  Steam, Gas, Liquids

  Size

   1/2”, 3/4”, 1”

  Body

  Type :  Standard 28000 Series Body with Integral Bonnet except for end-to-end 102mm Flanged body.

  Flow Direction: Flow-to-Open

  Bonnet

  Type : Integral Bonnet 

  Body and Bonnet

  Materials :  Steel 316, Stainless Steel

  Ratings & Connections

  Flanged: ANSI 150 - 600 

  Flangeless

  Screwed: NPT 

  Trim

  Full stellite needle plug

  Multistep anti-cavitation trim available

  Inherent Characteristics

  Linear

  Actuator

  Type : 10900 Series